How to maintain a semi-trailer
First, the tire inspectionCheck the tire stress at room temperature each and every month. If it is decrease than the regular standard, it ought to be replenished in time. The air strain must now not be too excessive or too low, in any other case it will have an effect on the riding safety. Check the cracking of tires, and exchange tires in time if there are attainable protection hazards. When deciding on tires, the fashions ought to be consistent.
Second, the battery renovation inspection.Check whether or not the battery is firmly fixed, and the electrolyte must be between the higher restriction and the decrease limit. When coming near the offline, the electrolyte or distilled water need to be delivered to the excessive degree line in time. Keep the high quality and poor cables of the battery in accurate contact, and preserve the battery easy and dry. For motors that have been positioned for a lengthy time, the high-quality and bad cables of the battery need to be removed, and the engine must be re-wired after about 1/2 a month to begin for about 20 minutes. If the strength is of course insufficient, it need to be charged in time.Third, test the liquid degree of grasp grasp cylinder.If the take hold of liquid degree is between excessive and low, it is normal; if it is decrease than the popular line, it may additionally be that the cup of the grasp cylinder or the slave cylinder is damaged. When the engine is running, it will be tough or not possible to shift gears. Please go to the nearest preservation station for restore immediately.Fourth, take a look at the brake fluid level.It is everyday to brake between excessive and low positions. If the brake fluid is shut to or decrease than the decrease limit, it potential that there might also be leakage in the device or immoderate put on of brake shoes, so you must go to the renovation station for protection in time. When including brake fluid, pay interest to including the identical kind of brake fluid to forestall harm to the cup, and guard the paint to forestall corrosion of the paint surface.Fifth, take a look at the engine coolant level.Never open the radiator cap when the engine is hot, in any other case it may also be scalded by way of spilled coolant or excessive temperature steam. After the engine cools down, test that the liquid degree of coolant need to be between full stage and low level; otherwise, distilled water or purified water or frozen liquid ought to be added, and the liquid stage top after including water must now not exceed full level. If it is discovered that the cooling fluid decreases swiftly in a brief time, take a look at the cooling device for leakage or go to the renovation station for inspection.